Hi all,

Last week, my turn signal switch decided it was time to 'retire'. First I thought the relay was the cause, but apparently this isn't the case. When I use the switch either way, the green arrows in the clock come on, but the turn signals don't. We tried several relais, but none solved the problem.

The switch has been feeling a little 'strange' lately: no clicks when I use it. My brake lights also don't work anymore, which is even a bigger problem.. (mass short circuit?)

I looked in the parts book, the item number is 341 953 515.
I compared it to regular type 3 and type 1 turn switches, the switch in my type 34 seems to be wider at the base than on this picture. Did this part change any time during production?

Hope any one can help me out!

Regards,

Remco

T34 turn signal levers are unique to T34s and all years shared the same part. T3 switch is similar but too short and will leave a large gap between lever & steering wheel. There are other discussions about this to search for here.