Chassis # 345056667 with title. Very solid, area at the battery repaired but should be re-done if need concours. Also included is the front end, transmission, and hardware. The engine for this chassis is completely rebuilt (zero miles). Machining by RIMCO to include align bore, drilled and tapped for full flow, and bored for cam bearings. All parts balanced to less than a gram. Proper high compression 83mm pistons, new cylinders, cam, lifters, oil pump, rebuilt rods, rebuilt heads with new guides, valves and springs. Crank is reground, all new bearings. Proper flywheel, new clutch and pressure plate. For a little more performance I can supply 1.25 to 1 rockers, but you will have to get the shortened pushrods. I have the shortblock assembled now, and can finish assembly before you pick up.
The chassis, transmission, and front end will need to be cleaned and painted. I would have the transmission checked and/or rebuilt. I can bring it to LRE in McHenry to have this work done for you for the actual charge. A typical LRE rebuild costs about $550.00 assembled and painted to the brake backing plates, and they give you back the worn parts. They replace the wheel bearings, and starter bushing. Basically, you bring them a greasy old tranny of uncertain condition, and they give you back an assembly ready to bolt in.
Not included is the engine tin, carbs, and generator.
In case it was not clear, there is no body. This is for the chassis only.
$1,200.00, FOB Naperville, IL I do not know how I could ship this, so pick up please.
Best regards,
Jim Schield
jschield@aol.com
Mobile 217-322-7525